Honda Car Forum

will a v6 engine from a 2002 mustang fit in to a 1992 acura integra>?

Any motor will fit into any car, with enough mechanical knowledge.The first thing you have to know is if you will have to hack the chassis, if the engine is too large to fit into the stock integra bay.Next, you will need to locate your motor mounts. You may have to cut and relocate them via welding.Third, you will have to know there are a LOT of parts you will need (such as a tranny, a custom drive shaft with rear diff, all the wiring, and ECU, just to name a few.)I will say it would probably benefit you more just to buy a GSR integra motor and drop it in. They have good horsepower and are also fairly stout engines. A V6 mustang motor was basically to get the car to move and was available for people who wanted the car, but didnt want to spend the extra money on performance.

maybe it could but why would you put a junk engine in a good car.if you want more power get a GSR engine.

It's too wide to fit in the engine compartment.

it willjust search on youtube... theres a 92-95 civic hatchback with a z06 engine!!! it hits like 8secs i think??? forgot... i do remember its a red civic tho!

Any engine can fit in any car you just need to know how and why would you but a 2002 mustang engine in that car a least but a 87-93 5.0 motor

If you want Mustang performance, BUY A MUSTANG!!!

why would u do tat i would get it if u put a type r in there but a mustang engine?too much work just go get a mustangyou would have to change a lot of things

don't put an american v6 into an import. if you want to make the power, get a k series engine (like in the rsx-s). it's lighter, more power (200 instead of 190), and will rev crazy high like those domestic engines only wish they could!!!But to answer your question, you could if you really wanted to.