Honda Car Forum


 

Go Back   Honda Car Forum - Accord Parts Civic Tuning Acura Racing > Discussion > Acura Technical

Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 11 Feb 2008, 07:46 am
Junior Member
 
Join Date: Feb 2008
Posts: 1
Default how you level your high beams in an acura integra?

how you level your high beams in an acura integra?
Reply With Quote
  #2 (permalink)  
Old 11 Feb 2008, 08:01 am
Senior Member
 
Join Date: Dec 2007
Posts: 337
Default

Add or remove sand from the trunk.
Reply With Quote
  #3 (permalink)  
Old 11 Feb 2008, 08:16 am
Member
 
Join Date: Jan 2008
Posts: 35
Default

i dont think u can.
Reply With Quote
  #4 (permalink)  
Old 11 Feb 2008, 08:31 am
Member
 
Join Date: Feb 2008
Posts: 42
Default

make sure all your tires have the same air pressure. then park where it's level, and point your headlights towards a wall. turn on your lights, low and high, and mark each beam on the wall. now to make adjustments.open your hood. there are 2 places where you can adjust the beams on each headlight housing. we'll use the passenger's side light as an example. first adjustable location.locate the bubble level on the rear of the light housing, between the low and high beams. take a step to the right, and look underneath where the level is, you should see some metal teeth. take a #3 philips screwdriver and turn one way or the other until the bubble in the level is in the middle.second adjustable location.look all the way to the right side of the headlight housing. remember, we're still using the passenger's light as an example. you'll see a clear plastic tube with a black line around it, with a little white tube inside with a red line with a 0 on it, sandwiched between one red line and blue line each. this is the adjustment gauge. through the frame of the car, you'll see the same metal teeth towards the left side of the headlight housing. again with your #3 philips, turn one way or the other until the red line with the 0 on it on the white tube is aligned with the black line on the clear plastic tube.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
I have a 1991 honda prelude si and the low beams quit now only high beams work? joretta r Honda Technical 4 05 Oct 2007 06:18 pm
Only high beams work on '98 Odyssey Doug B Honda 3 7 21 Oct 2006 09:04 am
01 Civic High Beams out ghegstad@hotmail.com Honda 2 3 17 Oct 2006 09:34 am
High beams not staying on Frink Honda 3 5 28 Oct 2003 10:37 am
High beams not staying on Frink Honda 2 0 27 Oct 2003 09:26 pm


All times are GMT -5. The time now is 09:34 am.


Attribution:
Honda News | Autoblog
Powered by Yahoo Answers




Powered by vBulletin®
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
LinkBacks Enabled by vBSEO 3.6.0 PL2 © 2011, Crawlability, Inc.
HondaCarForum.com is not affiliated with Honda Motor Company in any way. Honda Motor Company does not sponsor, support, or endorse HondaCarForum.com in any way. Copyright/trademark/sales mark infringements are not intended or implied.