Honda Car Forum


 

Go Back   Honda Car Forum - Accord Parts Civic Tuning Acura Racing > Discussion > Acura Technical

Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 10 Feb 2008, 04:04 am
Junior Member
 
Join Date: Aug 2007
Posts: 3
Default 1991 Acura Integra rack and pinion?

I have a 1991 Acura Integra RS that I just changed the rack and pinion, both front axles, both tierod ends, both lower ball joints, and both front brakes on. When I drive the car now, it feels like it has no power steering. I realize that it does need to be aligned, but the steering wheel is just so hard to turn. What can this be from? What can I do to fix this problem? Can anyone help me?
Reply With Quote
  #2 (permalink)  
Old 10 Feb 2008, 04:16 am
Junior Member
 
Join Date: Aug 2007
Posts: 16
Default

Several things ! in make sure they bleed the air out of the rack when it was installed , if so make sure the belt is turning on the power steering pump, if that's correct, then the alignment when your driving the tires would be almost sounding like they are skidding if they Aline was that for out, OK, now if a shop did it , return asap and if you don't think its safe to drive they must provide towing @ there cost, for safety reasons, tell them your concerned they did not do something correctly, and it may be unsafe to drive it only has two ball joints and struts and maybe they bent something I find it hard to believe they would not test drive it first and notice this , but if you did it yourself then if all is correct then its air trapped in the Steering rack and P/S Pump and it will be hard to turn cause with air it will growl and it might not if not enough fluid is in the rack OK no air is acceptable then let me know OK, take care just write
Reply With Quote
  #3 (permalink)  
Old 10 Feb 2008, 04:31 am
Junior Member
 
Join Date: Jan 2008
Posts: 3
Default

tracking. it will cost around £50. take it to the dealer or garage and ask for tracking test it wont cost much.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
95 honda civic needs new rack and pinion system, garage wants 700.00 for the job, is that fair? autonomous1980 Honda Technical 5 04 Oct 2007 02:22 pm
95 honda civic needs new rack and pinion system, garage wants 700.00 for the job, is that fair? autonomous1980 Honda Technical 0 04 Oct 2007 02:06 pm
my rack and pinion steering assy. is shot ,dumping out all my fluid .? dma2589@sbcglobal.net Honda Technical 2 27 Sep 2007 06:48 am
How do i know if my rack and pinion is bad? Does it make a noise? Derrice C Honda Technical 1 25 Sep 2007 02:24 pm
does anyone know how to take off the rack and pinion on 1994 honda civic? Ricky S Honda Technical 2 25 Aug 2007 12:08 pm


All times are GMT -5. The time now is 04:00 pm.


Attribution:
Honda News | Autoblog
Powered by Yahoo Answers




Powered by vBulletin®
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
LinkBacks Enabled by vBSEO 3.6.0 PL2 © 2011, Crawlability, Inc.
HondaCarForum.com is not affiliated with Honda Motor Company in any way. Honda Motor Company does not sponsor, support, or endorse HondaCarForum.com in any way. Copyright/trademark/sales mark infringements are not intended or implied.