Honda Car Forum


Go Back   Honda Car Forum - Accord Parts Civic Tuning Acura Racing > Discussion > Acura Technical

LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 18 Jan 2008, 06:16 pm
Junior Member
Join Date: Jan 2008
Posts: 1
Default Engine swap in an acura rsx?

I love rsx's and am going to get one soon. I dont want to be like everyone else so I was wondering if it would be possible to put a pontiac grand prix GTP motor in it. If so would I have to replace the tranny too? thx
Reply With Quote
  #2 (permalink)  
Old 18 Jan 2008, 06:46 pm
Junior Member
Join Date: Jan 2008
Posts: 4

thats about the gayest sh!t i ever heard....
Reply With Quote
  #3 (permalink)  
Old 18 Jan 2008, 07:01 pm
K80 K80 is offline
Junior Member
Join Date: Jan 2008
Posts: 3

why would you want to do something like that? if you are gonna get the base rsx put the k20a2 in it. if your gettin the type s put a k24a2 in it and slap some boost on it. putting a pontiac engine in an acura will be a dumb move.
Reply With Quote
  #4 (permalink)  
Old 18 Jan 2008, 07:16 pm
Join Date: Aug 2007
Posts: 56

Bad idea...Try swapping to a TSX engine or something to that effect.
Reply With Quote
  #5 (permalink)  
Old 18 Jan 2008, 07:31 pm
Junior Member
Join Date: Oct 2007
Posts: 13

put the engine from rdx, and it's compatible too. You will have something that's much better than the type-r
Reply With Quote
  #6 (permalink)  
Old 18 Jan 2008, 07:46 pm
Junior Member
Join Date: Dec 2007
Posts: 11

you want to put a v6 into that car? you will need MAJOR fabrication of everything and yes you will need a new tranny the acura won't be able to handle the power from that engine. you will be better off trying to fit a J35 2005 Acura TL V6 (290HP) into that car...
Reply With Quote
  #7 (permalink)  
Old 18 Jan 2008, 08:01 pm
Join Date: Sep 2007
Posts: 71

putting a tl engine in the car would be nic but hes gonna need custom motor mounts. the k20a3, k20a2, k20a, and k24a2 are all interchangeable so he could use whichver motor mounts he wanted or he could polyurethane mounts so the engine doesnt flex as much.the k24 is going to be the most expensive out of the bunch with the exception of the k20a which is jdm spec and might not pass usa emissions. the k20a3 is the lower end with a whopping 160 hp but is the most fuel economical with vtc and i-vtec on the intake side. the k20a2/k24,k20 all have the standard vtec that people think of with the vtec on the intake and exhaust cams
Reply With Quote

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
I have an acura vigor and i want a different engine what can i swap if for? Jose V Acura Technical 2 01 Nov 2007 03:16 pm
i did a engine swap on a acura integra ls to a b18 c1 but i just used the obd2 hardness on Hector G Acura Technical 6 29 Aug 2007 02:06 pm
i want to swap engine from my base acura rsx to the k20 type-r engine? Jose A Acura Technical 5 23 Aug 2007 03:40 pm
97 acura integra engine swap? bmxdude2087 Acura Technical 1 21 Aug 2007 01:59 pm
is it possible to swap a k-series engine into an acura integra if so will it be a gain ronny t Acura Technical 5 21 Aug 2007 03:46 am

All times are GMT -5. The time now is 02:47 pm.

Honda News | Autoblog
Powered by Yahoo Answers

Powered by vBulletin®
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
LinkBacks Enabled by vBSEO 3.6.0 PL2 © 2011, Crawlability, Inc. is not affiliated with Honda Motor Company in any way. Honda Motor Company does not sponsor, support, or endorse in any way. Copyright/trademark/sales mark infringements are not intended or implied.