Honda Car Forum


 

Go Back   Honda Car Forum - Accord Parts Civic Tuning Acura Racing > Discussion > Acura Technical

Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 19 Nov 2007, 11:01 pm
Junior Member
 
Join Date: Nov 2007
Posts: 1
Default How do you change the thermostat on a 1993 Acura integra?

How do you change the thermostat on a 1993 Acura integra?
Reply With Quote
  #2 (permalink)  
Old 19 Nov 2007, 11:16 pm
Member
 
Join Date: Aug 2007
Posts: 32
Default

The upper radiator hose goes to the thermostat case, remove it and the case to replace the thermostat. Assemble with new gaskets or hondabond. Then unscrew the bleeder valve and fill it with new coolant mix.
Reply With Quote
  #3 (permalink)  
Old 19 Nov 2007, 11:31 pm
Junior Member
 
Join Date: Nov 2007
Posts: 6
Default

Be sure its at the upper radiator hose before you start, on some of the newer cars the thermostat is at the lower rad. hose, this has prove to help the engine cool better, and use new coolant and a pan to catch the old coolant. God Bless
Reply With Quote
  #4 (permalink)  
Old 19 Nov 2007, 11:46 pm
Member
 
Join Date: Sep 2007
Posts: 60
Default

the t-stat is located at the back of the head in the LOWER radiator hose connection below the distributor-on the passenger side of engine. find the end of the hose and remove the part it connects to on the engine-you will need to be patient as one of the 10mm bolts that hold the thermostat housing is vvery hard to access easily-anything in the way should be removed,if possible to make it possible to remove...remember when you add coolant to bleed the system via the bleed screw located where the UPPER radiator connecs to the engine on the passenger side at the front of the cylinder head- when air stops coming out close the screw by tightening it. continue filling untill full (fill reservoir too) . run engine untill warmed up, stop it and let it cool down-re-check level of coolant.fill as needed. Also remember to check everywhere for coolant leaks before your date!!!!!!
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Looking for a 99 Acura/Honda Integra non-vtec SPOON or MUGEN Thermostat, anybody know of... DJ FK Roland Acura Technical 2 22 Aug 2007 07:26 am
hey i need to know if anybody knows where the thermostat is located on a 1996 acura integra ls? nickab650 Acura Technical 6 21 Aug 2007 01:28 pm
97 acura integra thermostat? bmxdude2087 Acura Technical 6 21 Aug 2007 11:46 am
how do i replace the oil pan gasket from a 1993 Acura Integra? Mighty Acura Technical 2 20 Aug 2007 06:08 am
94 Integra Thermostat Change Matt Acura 3 25 Dec 2004 11:58 am


All times are GMT -5. The time now is 02:43 pm.


Attribution:
Honda News | Autoblog
Powered by Yahoo Answers




Powered by vBulletin®
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
LinkBacks Enabled by vBSEO 3.6.0 PL2 © 2011, Crawlability, Inc.
HondaCarForum.com is not affiliated with Honda Motor Company in any way. Honda Motor Company does not sponsor, support, or endorse HondaCarForum.com in any way. Copyright/trademark/sales mark infringements are not intended or implied.