Honda Car Forum

Does anyone know the list of parts I would need to swap my tranny in my 1996 Acura Integra. I would also like to know an estimation on the cost.And no Im not selling my car and buying one that has a manual transmission.

A lot of money, it really is easier and cheaper for the most part to just sell your car and get one with a manual.

your gonna tune it up right?

You would be silly not to just buy one thats a 5-speed. But to answer the question you will need between $6,000-$8,000 to do it correctly. the parts you will need are: the tranny, tranny mounts, axles, hubs, shift linkages, clutch pedal, clutch master cylinder, COMPLETE wiring harness from the 5 speed vehicle, ECU from the 5-speed vehicle, different distributor, 5-speed flywheel, clutch, shifter, shift boot, center console for the interior, hydraulic lines for the master cylinder/tranny connection, a few sensors, and misc. other little parts. And being as your car is a automatic it is either a LS or RS and has the weak B18A in it. so you could go buy a 1996 GSR with more HP and torque, and still spend less.

frankencar on the makes

What are all the parts I need to do an automatic to manual conversion?LS or GS-R TrannyTransmission LinkagesTransmission MountsClutchFlywheelPressure Plate5 Speed PedalsManual ECU Manual Gauge Cluster (optional)Shifter and Shift BootClutch/Slave CylindersClutch ReservoirMatching Throttle Cable for the Pedal Sethydraulic linesIntermediate ShaftUpper transmission mountshould cost that much no more than 3-5k depending on new or used parts and the labor chargejoin team-integra.net its a very helpful site for integra owners......for the record your car has a B18B not B18A

more trouble, time and money than it's worth.Just buy a stick...