Honda Car Forum | ![]() |
|
|||||||
| Register | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|||
|
do 1990 integra uses the same wiring harness as a 1992 civic? am gonna try to help my friend put a 90 integra engine in a 92 civic but i dont know if i have to modify the wiring harness, i know some other years use the same but am not sure about this one, can someone help?it is a ls, but is there some kind of kit to make this complete swap, i know some companies make them but i dont knoe if they also help you with the wiring conversion, if u guys know of any just let me know,i'll appreciate it
|
|
|||
|
nope, close but you will have to modify.a 92 civic harness is the same as a 94 integraharness. if you are using a p28 computerthat has been chiped it will work finebut you will need to extend a couple ofparts of the harness to stop it from tearing or rubbing.
|
|
|||
|
first off. your putting an obd0 motor in an obd1 car, you will have to modify the harness, plus buy motor mounts specificly made for this swap. and you will also need a new ecu, as mentioned before a chipped p28 will be you best bet as these are widely available.Check out hasport for the mounts http://www.hasport.com/products/mount_kits/egb1.htmthe are multiple write up covering this swap at www.Honda-tech.com
|
|
|||
|
last post was right OBD-0 your car with a OBD-1 harness. Dosent make since and wtf is up witht he chip P28 EX/SI going do. Look from your DX motor remove the engine harness and replace where the old 90 integ harness was then convert the Integra motor (not sure if its a GSR Vtec since you didnt mention it) to OBD-1 it be easyier to get a OBD1 LS intake manifold complet and swap if to the B18 motor, but you need to swap out injectors and dizzy since OBD0 dosent work with OBD1. ECU 1994-1995 Integra LS ECU or if vtec 1994-1995 GSR or in that case its ok to say EX/Si P28 ecu chip. Tranny if using the 90 integ motor and tranny you need a hasport cable to hyrdo covenrsion.
|
|
|||
|
i think the 90 integra's have a B17 engine in them, (my brother has had a 90, 91, and another 91 integra, and i have a 92 integra, but im not sure what is in a 92 civic.. i don't think it's a b17, so i dont think it will work.
|
![]() |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| wiring harness help!!? | bmxdude2087 | Acura Technical | 4 | 26 Aug 2007 09:40 am |
| 1995 Honda Passport - Wiring harness - Technical Question | ajpdla | Honda 3 | 0 | 01 Nov 2004 10:40 am |
| 92 Integra LS (1.8) Wiring Harness | M Wright | Acura | 1 | 21 Oct 2004 02:53 am |
| 02 Accord -- Where is the wiring harness connector? | miltimj | Honda 3 | 2 | 10 Jun 2004 04:57 pm |
| 02 Accord -- Where is the wiring harness connector? | miltimj | Honda 3 | 0 | 10 Jun 2004 11:52 am |