Honda Car Forum


 

Go Back   Honda Car Forum - Accord Parts Civic Tuning Acura Racing > Discussion > Acura Technical

Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 24 Aug 2007, 01:46 pm
Junior Member
 
Join Date: Aug 2007
Posts: 26
Default Is it easy to install an integra aftermarket intake?

Is it easy to install an integra aftermarket intake?
Reply With Quote
  #2 (permalink)  
Old 24 Aug 2007, 01:48 pm
Senior Member
 
Join Date: Aug 2007
Posts: 891
Default

yes it is!! =)cold air intake or short ram?all you have to do is remove the stock intake from the throttle body. remove all the old intake parts and install the new one you may the screw from the stock intake if it has a brackethttp://www.team-integra.net/sections...rticleID=85its basicly the same concept =) for any intake systemif you need to remove the front bumber for a cold air intakethis is for 2nd gen integra http://www.team-integra.net/sections...ticleID=323and this is for third gen 94-01 http://www.team-integra.net/sections...p?ArticleID=68
Reply With Quote
  #3 (permalink)  
Old 24 Aug 2007, 01:54 pm
Junior Member
 
Join Date: Aug 2007
Posts: 22
Default

I installed mine without removing front bump just take off passenger side wheel and splash shield remove the black box under the fender that's where your new filter will be mounted at. Everything else is simple remove tube and hoses new tube will go on but you will have one small hose that will not go on the tube there's no place for it there. Unbolt filter box and there's your hole for the tube to run through the fender and your done!
Reply With Quote
  #4 (permalink)  
Old 24 Aug 2007, 02:00 pm
Kym Kym is offline
Junior Member
 
Join Date: Aug 2007
Posts: 5
Default

Very easy Girl, if i could do it you can to.
Reply With Quote
  #5 (permalink)  
Old 24 Aug 2007, 02:04 pm
Senior Member
 
Join Date: Aug 2007
Posts: 204
Default

Yes.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
how do i install cold air intake on a 2000 acura integra gsr. couple xtra hoses on Rj Acura Technical 6 18 Aug 2007 07:46 am
How do you install a Cold Air Intake on a 1996 Integra LS? HELP!!!? mlbansky Acura Technical 2 16 Aug 2007 01:37 pm
Which aftermarket keyless entry system to install on 2002 Honda Civic LX? rick.mckee@aia.com Honda 2 1 13 Jun 2007 05:31 pm
04 accord ex aftermarket radio install Edward Quinn Honda 2 1 07 Dec 2004 06:21 am
Install an ECU module easy ? Snake Djip Honda 3 5 10 Dec 2003 07:06 am


All times are GMT -5. The time now is 04:24 am.


Attribution:
Honda News | Autoblog
Powered by Yahoo Answers




Powered by vBulletin®
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
LinkBacks Enabled by vBSEO 3.6.0 PL2 © 2011, Crawlability, Inc.
HondaCarForum.com is not affiliated with Honda Motor Company in any way. Honda Motor Company does not sponsor, support, or endorse HondaCarForum.com in any way. Copyright/trademark/sales mark infringements are not intended or implied.