Honda Car Forum

i want to put my friends rims on my car. he has a 96 altima with after market rims i have a 93 acura integra. my lug pattern is smaller than the rim's lug pattern is there anything i can do to make the rims fit?

If they are not universal give up,,change your lugs rotors and breaks lines ,calipers,,,, not that easy ,Dont screw your car up ,Cheaper to buy rims made for your car .I work for FireStone

Since the lugs are attached to the rotor, I can only see you changing your rotors if they are interchangeable.Best source of information is tire shops e.g Big O, LesSchwaab etc.Good Luck.

JEN W is 100% right.Get the right rims. Check on ebay for used rims. Check local yellow pages under ''wheels-used" .

Nope.my guess your integra is 4x100(my 98 integra is).. the altima is probly 4x108 or 4x114.3

if it dont fit it dont fit

i would simply go to a machanic

It will not work the way it is set up right now. Just to get those wheels on your ride, you are looking at about an extra $2,000.00 for an upgrade on the lug-pattern. That is so not worth it, best suggestion, like some already suggested buy new (other) rims. If you really want those babies, test if the rims can be mounted on an old Legend (89-90) spindle, if they can, you will need to figure out if that spindle can fit in your car.

i got away with boring a little out of each hole(all) til it went over but it was so close to start with like 1/4 inch on one hole was off. it depends sometimes on the shape of the lug nut if its got a steep angle on where it goes in to the rims it makes the bolts bend if the holes are enlarged allot