Honda Car Forum


 

Go Back   Honda Car Forum - Accord Parts Civic Tuning Acura Racing > Discussion > Acura Technical

Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 15 May 2013, 02:48 am
dan dan is offline
Senior Member
 
Join Date: Aug 2007
Posts: 147
Default 2003 Acura Rsx Motor Mount Issues?

I have a 2003 Rsx, When i first bought the car i was having alot of movement in the engine bay from my engine, i replaced all the mounts and i am still having the same problem. All the replacement mounts were oem. Should i put in solid mounts, or can i put in fillers for the front and back? Any advice would be amazing. Thank you.
Reply With Quote
  #2 (permalink)  
Old 15 May 2013, 03:48 am
Senior Member
 
Join Date: Aug 2007
Posts: 478
Default

Um wow that is very uncommon, no offense but you did replace them all right? Reason I say that is if you left a broken or weak one in there what happens is the other ones wear quickly because of no support from that broken one, other than that you said you used factory replacement mounts that's good,, so at this point I would double check everything and replace anything needed with quality dealer parts (I'll bet you might have missed a broken one) don't use solid aftermarket or urethane mounts or urethane Mount supports because the car will drive and sound like crap,, I've driven them like that, just awful!
Reply With Quote
  #3 (permalink)  
Old 15 May 2013, 04:02 am
Junior Member
 
Join Date: Aug 2007
Posts: 11
Default

Make sure you installed the motor mounts correctly, that they work properly, then you may want to look into motor mount inserts. Energy Suspension makes good ones (I have a set on mine), and I also have Ingalls engine damper which minimizes engine movement especially during load... only thing is these transfer some of the vibration to the cab and it's noticeable, so if that's not what you're looking for then don't install them.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
can we mount acura tl 2001 transmission on acura tl type s 2003 and will that effect on the ECU? sabhan18 Acura Technical 1 11 Apr 2013 03:17 pm
acura integra motor mount.? xintegragsr92x Acura Technical 2 23 Mar 2009 06:46 pm
How much will the dealership charge to replace the passenger side motor mount on a 2003 RSX? lightpost08 Acura Technical 5 15 Jul 2008 02:31 am
WTB: 1992 Acura Integra GS Motor Mount Hootie Acura 0 06 Feb 2007 12:07 pm
WTB: 1992 Acura Integra GS Motor Mount Hootie Honda 2 0 06 Feb 2007 12:07 pm


All times are GMT -5. The time now is 11:13 am.


Attribution:
Honda News | Autoblog
Powered by Yahoo Answers




Powered by vBulletin®
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
LinkBacks Enabled by vBSEO 3.6.0 PL2 © 2011, Crawlability, Inc.
HondaCarForum.com is not affiliated with Honda Motor Company in any way. Honda Motor Company does not sponsor, support, or endorse HondaCarForum.com in any way. Copyright/trademark/sales mark infringements are not intended or implied.