Honda Car Forum


Go Back   Honda Car Forum - Accord Parts Civic Tuning Acura Racing > Discussion > Acura Technical

LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 09 May 2013, 03:31 pm
Senior Member
Join Date: Aug 2007
Posts: 443
Default Integra no compression?

It's a 92 integra and cylinder 1 has no response, after i put gas it sounded like it was misfiring so I check by pulling spark plugs and and cylinder 1 had no response I changed spark plugs, and wires and changed dizzy. And changed injectors. Did a cold engine compression check and it was 180,180,150,0, I'm going to try to put a little oil in the cylinder and do it again to see if piston rings are bad. but I was gonna do a valve adjustment but the valves have alot of play, and my timing belt feels loose. Next is leak down test Thanks in advance the car has spark, fuel, but no compression in cylinder1 what do you think. The car did have blow by from valve cover breather.
Reply With Quote
  #2 (permalink)  
Old 09 May 2013, 03:49 pm
Senior Member
Join Date: Aug 2007
Posts: 137

Sounds like to me you have a broken valve spring on #1 cyl. Pull off the valve cover and check for anything broken. An open exhaust valve would give you zero compression. Even if you had broken rings you would still get a low compression reading. Hope this helps.
Reply With Quote

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
high compression pistons for integra? robert Acura Technical 2 08 Feb 2011 07:01 am
what is the compression ratio on a acura integra gsr b18? Ian Acura Technical 3 28 Dec 2009 02:16 am
Low compression in 99 Integra LS!!!!! Help!!!? CRXer!! Acura Technical 2 27 Aug 2009 02:16 pm
compression test number on a 94 integra gsr? David Y Acura Technical 1 25 Mar 2009 02:16 am
what is the compression ratio for a integra ls? bill j Acura Technical 1 25 Aug 2007 11:46 am

All times are GMT -5. The time now is 10:05 pm.

Honda News | Autoblog
Powered by Yahoo Answers

Powered by vBulletin®
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
LinkBacks Enabled by vBSEO 3.6.0 PL2 © 2011, Crawlability, Inc. is not affiliated with Honda Motor Company in any way. Honda Motor Company does not sponsor, support, or endorse in any way. Copyright/trademark/sales mark infringements are not intended or implied.