Thanks, Curly. There's actually some screw holes on the angled bracket that
connects the radio and CD player together, but they don't seem to match any
holes in the dash. I will check this again to see if I overlooked
something.

"motsco_ _" <"motsco_ _"@interbaun.com> wrote in message
news:40CA97FD.8010708@interbaun.com...
> Daniel Choy wrote:
> > Hope this doesn't get me in trouble, but since I have yet to get
> > suggestions, I'd like to poll the group again.
> >
> > Thanks - Dan
> >
> > "Daniel Choy" <dchoy@telusplanet.net> wrote in message
> > news:jduxc.9152$NT6.1877@clgrps13...
> >
> >>I'm trying to install a slave CD player (Honda Part ##08A06-121-210)
that
> >>matches the AM/FM/Cassette head unit in my 91 Accord.
> >>
> >>Originally, the head unit was connected to a plastic storage sleeve,
along
> >>with a metal bracket which bolted onto the dash, right above where the
> >>ashtray would be. I removed the storage sleeve, attached the CD player
to
> >>the head unit, but I had to lose the original metal bracket, since the
CD
> >>came with its own. Now I cannot figure out how to secure the whole
> >
> > shebang
> >
> >>to the dash - the combined unit just sits in the dash, ready to rattle
> >>around. What could I be missing here ?
> >>
> >>Thanks - Dan
>
>
> ++++++++++++
>
> I just went thru the same dilema on a '95 Ody a few weeks ago. After I
> built a little bracket, and put the whole dash together, I asked myself:
> Should I have taken a picture of that?
>
> Answer is now YES!
>
> I'l write you with the cure, and maybe a picture. 'Curly'
>