"tflfb" wrote:
> Do you have the old piece, if so I would get some JB Weld, rotate the pulley
> to a position where it could be refastened with JB Weld, and let it sit over
> night.
>
> If a little of the cement squishes out to the belt side, it may be possible
> to remove it with sandpaper after it drys.

Yes, I do have the old piece. I'll read up on JB Weld's strength characteristics
and assess the risk if the "weld" does not hold and the little piece goes flying
off. (It's about 1.5" of pulley arc length" x 9/16" x 1/8".) Thanks.