"Caroline" <caroline10027remove@earthlink.net> wrote in message news:<cHYnc.16057$Hs1.13209@newsread2.news.pas.ear thlink.net>...
> "John Pinkham" <jwpinkham@comcast.net> wrote
> > The Haynes manual for our 92 Accord lists a value for igniter resistance,
> > but doesn't say between which terminals it is measured.
>


take off the cap. pull the wire from the ignitor to the negative side
of the coil. connect a test light from the wire to the pos side of the
battery. crank the engine, if it flashes the ignitor is doing it's
job, the coil is bad.
Chip