E. Meyer <e.meyer0SPAM@ieee.org> wrote:
> On 4/7/04 9:35 AM, in article c513ng$4h6$1@newsreader.wustl.edu, "XG"
> <gungxu@yahoo.com> wrote:

>> For a 1992 accord Lx with auto transmission. Is the plug the one that is at

> Honda drain plugs are notoriously hard to remove. Use a hardened breaker
> bar and put the 4 foot gas pipe on the end of it for leverage.

I had a Datsun with a cast iron filler plug in an aluminum transmission.
It couldn't be removed with conventional tools. My dad put a four foot
pipe wrench on it and pushed with his legs while holding onto the front
bumper. The engine/transmission torqued in the frame, but the bolt didn't
come loose.

The Datsun dealer said they didn't even bother trying to take out the
filler plug. They refilled the transmission through the backup light
switch hole. So did I.

--
---
Clarence A Dold - Hidden Valley (Lake County) CA USA 38.8-122.5