Re: How to replace Integra speedometer cable
"Jafir Elkurd" <jafir@nospam.no.spam.hotpop.com> wrote in message news:<10jva6hjhq384a@corp.supernews.com>...
> At speed sensor in the transmission, pull the rubber boot back on the cable.
> There should be a wire clip that you can pull off with a hook or needle
> nose. After removing the clip you should be able to just pull the cable
> straight up off of the speed sensor.
>
> <paulgreen@spymac.com> wrote in message
> news:20040908155504895-0700@free.teranews.com...
> > The speedometer of my 1987 Acura Integra recently just stopped working (
> > as did the odometer). I presume the speedometer cable broke and needs
> > replacing. I have the service manual and it has a diagram of the
> > instrument cluster, so I think there should be no problem in
> > disconnecting that end, but I could not find out what to do at the other
> > end. Anybody done this, and could give me advice?
> >
> > Thanks a lot!
> >
> >
> > Paul
That's very helpful --- thanks, I'll give it a go.
Paul
|