I just did the remotes on my '98 Odyssey. If you have the simple
two-button remote, it probably uses a different procedure from ck's
2000. Basically:

1. Open driver's door.

2. Hold driver's door control in unlock position until the following
steps are completed. (A helper makes this easier.)

3. Insert/remove ignition key five times

4. Insert ignition key (door locks should cycle.)

(Steps 3 and 4 must be completed within 10 seconds.)

5. Press lock or unlock button on remote (door locks should cycle.)

6. Repeat step 5 with an additional remote (if you have one.) This
must be done within 10 seconds of step 5.

7. Release driver's door unlock control.

8. Test the remotes.

Note: A maximum of two remotes can be programmed and they must both
be programmed at the same time. You may want to install new batteries
in the remotes before programming.



On Sat, 27 Dec 2003 13:34:09 GMT, "ck" <ccopit@tampabay.rr.com> wrote:

>I just did it on my 2000 accord here is what to do it is easy
>Get te remotes together
>Turn key on and press lock on remote torn hey back to lock stop then turn
>key on and press lock turn key back to lock turn key to on and press lock on
>remote you might have to turn key off the on and press lock a 4th time. now
>you should hear the locks work you are now in the program mode press lock on
>second remote to confirm then turn key off and you are done Good Luck
>"Stephen Bynum" <sbynum@uu.net> wrote in message
>news:3FEC7B88.330CD857@uu.net...
>> All,
>>
>> Does anybody know how to program a remote for a genuine honda
>> keyless entry system on a 98 Accord LX?
>>
>>
>