"gsr_integra99" <gsr_integra99@hotmail.com> wrote in message
news:93kqb.45231$un.19760@bignews6.bellsouth.net.. .

I want to add, put air press to the cylinder to remove the valve spring,
hold the valve as you remove the air press and then turn the valve when it
is on the piston, if good apply press and install spring. do each valve one
at a time. If you are not careful you could drop the valve into the cylinder
if the piston is not at tdc.. Once the piston is at top dead center I lock
the engine so it will not turn when I add air pressure to remove and install
springs. Let the mechanic do it if possible.