Since this was a home-brew device, their were no specs to follow.
"Tom Waugh" <twaugh5@cox.net> wrote in message
news:XcGib.74796$sp2.65946@lakeread04...
> What did you torque the strut tower nuts to after installation -- 30 ft
lbs.
> Recall that's what I used before on a Civic.
>
> "Pankoski" <pankoski@ccrtc.com> wrote in message
> news:vok1ggmdg281ea@corp.supernews.com...
> > Noticeable handling improvements for sure. I made one out of 1" heavy
> > tubing (or 1" light wall pipe). I saw one installed in some other car
> and
> > it ain't nothing but a pipe with a bit of a bend at each end and a a
> slight
> > curve in the middle.
> > "twaugh5" <twaugh5@cox.net> wrote in message
> > news:Q6fib.74341$sp2.26724@lakeread04...
> > > Appreciate any input from 5th Gen Prelude owners on STB
recommendations
> > for
> > > the Prelude. Any modifications that are necessary to provide for
> > clearance,
> > > or other installation problems. Results -- handling improvement?
> > >
> > >
> >
> >
>
>