Appreciate the useful info.

"blh" <baolonghoang@netscape.net> wrote in message
news:3F8B41A0.3020500@netscape.net...
> Have a Neuspeed brace for my 99 Prelude. I noticed the difference right
> away. The handling is much more nervous and precise. You need to
> torque the nuts to 28 ft-lbs (from the manual).
>
> Tom Waugh wrote:
> > What did you torque the strut tower nuts to after installation -- 30 ft
lbs.
> > Recall that's what I used before on a Civic.
> >
> > "Pankoski" <pankoski@ccrtc.com> wrote in message
> > news:vok1ggmdg281ea@corp.supernews.com...
> >
> >>Noticeable handling improvements for sure. I made one out of 1" heavy
> >>tubing (or 1" light wall pipe). I saw one installed in some other car
> >
> > and
> >
> >>it ain't nothing but a pipe with a bit of a bend at each end and a a
> >
> > slight
> >
> >>curve in the middle.
> >>"twaugh5" <twaugh5@cox.net> wrote in message
> >>news:Q6fib.74341$sp2.26724@lakeread04...
> >>
> >>>Appreciate any input from 5th Gen Prelude owners on STB recommendations
> >>
> >>for
> >>
> >>>the Prelude. Any modifications that are necessary to provide for
> >>
> >>clearance,
> >>
> >>>or other installation problems. Results -- handling improvement?
> >>>
> >>>
> >>
> >>
> >
> >
>