Have a Neuspeed brace for my 99 Prelude. I noticed the difference right
away. The handling is much more nervous and precise. You need to
torque the nuts to 28 ft-lbs (from the manual).

Tom Waugh wrote:
> What did you torque the strut tower nuts to after installation -- 30 ft lbs.
> Recall that's what I used before on a Civic.
>
> "Pankoski" <pankoski@ccrtc.com> wrote in message
> news:vok1ggmdg281ea@corp.supernews.com...
>
>>Noticeable handling improvements for sure. I made one out of 1" heavy
>>tubing (or 1" light wall pipe). I saw one installed in some other car
>
> and
>
>>it ain't nothing but a pipe with a bit of a bend at each end and a a
>
> slight
>
>>curve in the middle.
>>"twaugh5" <twaugh5@cox.net> wrote in message
>>news:Q6fib.74341$sp2.26724@lakeread04...
>>
>>>Appreciate any input from 5th Gen Prelude owners on STB recommendations
>>
>>for
>>
>>>the Prelude. Any modifications that are necessary to provide for
>>
>>clearance,
>>
>>>or other installation problems. Results -- handling improvement?
>>>
>>>
>>
>>
>
>