The D16Z6 uses a heavy rubber dampened crank pulley. It weighs over 6 lbs.
If you use a lightweight pulley, even a D15 pulley, you will damaged the
engine in short time.

The same motor that had the bad bearings after 10,000 miles with lighweight
pulley......looked like this 30,000 miles after correct pulley was used.

http://www.codyscafe.com/~mrbone/pic...6/P8200005.JPG

I had also used 25 bottles of nitrous since replaciing the bad bearings,
none before.

--
Charles Tague
93 Honda Civic DX HB
1.6L SOHC VTEC 14.85 @ 89 mph,1.98 60 ft.
With ZEX 85 hp ZEX 13.09 @ 103 mph, 1.81 60ft.
86 Pontiac Trans Am
225/50/15 GForce Drag Radials
305 peanut cammed 15.29 @ 88 mph
http://home.cinci.rr.com/mistab0ne/
"dimmi" <someone@new.rr.com> wrote in message
news:33Vhb.41546$832.20518@twister.rdc-kc.rr.com...
> Why would it hurt? Is the pulley balance-fit to the crankshaft? My pulley
> died after pulley bolt became loose (my bet). Crank ground hole in the
> pulley, it is at least 2 mm wider now in diameter, so it seats very loose
on
> crank. I tried just tighten the bolt but my mechanic said it is a bad
idea.
> The key was bitten hard while trying to hold loose pulley on the crank -
> transformed almost into X shape.
> So, I got exact same pulley, cut new oversized key, torgued it.
> Now you are saying I cannot go with a different pulley. I have no choice.
>
> TNX
>
> "Mista Bone" <MistaB0ne"nospam"@cinci.rr.com> wrote in message
> news:eZihb.62408$uJ2.14778@fe3.columbus.rr.com...
> > no smart person would replace a D16Z6 pulley, it WILL destroy the main
> > bearings in 10,000 miles. Don't even try to use a D15 on either.
> >
> > http://home.cinci.rr.com/mistab0ne/Pics2/badmainsx.jpg
> >
> > --
> > Charles Tague
> > 93 Honda Civic DX HB
> > 1.6L SOHC VTEC 14.85 @ 89 mph,1.98 60 ft.
> > With ZEX 85 hp ZEX 13.09 @ 103 mph, 1.81 60ft.
> > 86 Pontiac Trans Am
> > 225/50/15 GForce Drag Radials
> > 305 peanut cammed 15.29 @ 88 mph
> > http://home.cinci.rr.com/mistab0ne/
> > "dimmi" <someone@new.rr.com> wrote in message
> > news:Undhb.15992$pg7.10555@twister.rdc-kc.rr.com...
> > > If anybody out there has a crankshaft pulley for D16Z6 92-95 Civic for
> > sale
> > > (3 sets of tracks: AC, PS, Alt) or can point to the possible source of
> > used
> > > car parts (immediate, reliable - friend, tune-up shop, website) I will
> > > really APPRECIATE IT.
> > >
> > > I know lots of guys drop the stock pulleys and put underdrive or
racing
> > > style. Those old pulleys have to wait somewhere for me, ...?
> > >
> > > Dimmi
> > >
> > >
> >
> >
>
>