"SoCalMike" <mikein562athotmail@hotmail.com> wrote in message
news:Qfrab.506478$o%2.223602@sccrnsc02...
>
> "DS" <riderbmw@hotmail.com> wrote in message
> news:hIqab.497700$4UE.3554@news01.bloor.is.net.cab le.rogers.com...
> > I have a 96 Civic and the windshield washers have lost pressure and
barely
> > wet the windshield. I looked under the hood and all the hoses are tight
> with
> > no apparent leakage that I can see.
> >
> > Thus I figure it's the motor -
>
> check all the hoses... unplug, and blow thru em. nozzles also get clogged,
> as well as the screen on the pump inlet.
>
> id bet on nozzles

Had a similar problem before. Another idea is to check the length of the
hose tubing for any crimping in the line. A clip holding the hose was also
putting a kink in the line. If so, this is an easy and simple fix.

Good luck,
-Dave