Konrad Starek <konrad.starek@rcn.com> wrote in message
news:<67guhv8n3ke2adgu3tco6u3npmsis2megp@4ax.com>. ..
>> I have recently installed a Graco carseat base in my 91 Civic. I do
>> not have the Owner's Manual for the car but it appears that I can only
>> install the base in the center of the rear seat. My preference was to
>> actually install it on one of the sides but I am not sure whether this
>> is possible. Any advice would be appreciated.

>You should be able to mount the seat in any position, as long as you
>can get a good installation. According to this carseat compatability
>database:

>http://www.carseatdata.org/database.html

>several people have successfully installed seats in the outboard
>positions. What do you mean when you say it appears you can only
>nstall it in the center?

>Tracy

Tracy - thanks for sending the link. Unfortunately, the 1991 Civic
and Graco Snagride combination is not listed there.

What I meant is that this:
(1) there are no manual latch locations on the back seat = I cannot
use the latch to mount the car seat
(2) Graco instruction manual says that lap/shoulder belts with
retractors (=1991 Civic) cannot be used to mount the base.

The next logical step would be to look up Operator's Manual but I do
not have one. Accordingly, it was more practicable to ask the
newsgroup readers than to buy the manual.

Konrad