"Caliban" <caliban27@earthlink.net> wrote in message
news:9_XTa.118222$Io.10084666@newsread2.prod.itd.e arthlink.net...
> From Stephen's message, you add via the filler bolt hole. I bought around
> three feet of clear tygon tubing (available at Home Depot type places) of
> 1/2 inch diameter or so and pushed one end into the filler bolt hole. At
the
> other end, I fitted a funnel whose bottom was slightly smaller than the
> tubing ID. Pour the transmission oil through this.

I added a 1/2 inch diameter 90 degree elbow to mine. No kinks in the line
that way.

> I recommend putting a dry oil pan beneath the filler hole to signal when
> it's full.

Good plan.