I did unhook the fan connector. It feels like something is holding it in at
the bottom. Are there only the 2 bolts in the top.
"jim beam" <spamvortex@bad.example.net> wrote in message
news
6-dnZBiorqU2xPbnZ2dnUVZ_qvinZ2d@speakeasy.net...
> FRAK wrote:
> > "Tegger" <tegger@tegger.c0m> wrote in message
> > news:Xns996547E8E55B6tegger@207.14.116.130...
> >> "FRAK" <dispman2000@yahoo.com> wrote in
> >> news:138s80vcilqufd8@corp.supernews.com:
> >>
> >>> Any tips on replacing the radiator fan on a '96 Accord. How do you get
> >>> to the bottom bolts in the shroud. Also do you have to remove the top
> >>> radiator hose to get the shroud out.
> >>>
> >>>
> >>>
> >>
> >> Remove the two hold-downs at the top. The rad will lift out with the
fan
> >> attached.
> >>
> >> --
> >> Tegger
> >>
> >> The Unofficial Honda/Acura FAQ
> >> www.tegger.com/hondafaq/
> >
> >
> > Is there not any bolts in the bottom. When I take the top 2 out it
seems
> > like it doesn't want to come out. I was afraid something would break.
>
> have you unplugged the electrics as well?