View Single Post
  #1 (permalink)  
Old 08 May 2007, 10:49 am
noobiedoobie
Guest
 
Posts: n/a
Default brake pad replacement

Hi,
I have put 40,000 km on my 2005 Honda Odyssey and have had no problems
thus far except the A/C condenser got hit by a stone and needed
replacement. Common design flaw (or should I say design intention) on
the Odyssey. Repair bill over 800 bucks to replace this. They stick
it right up front where it waits for rocks and pellets to hit it.
Anyway, I checked the front brake pads for wear by taking them out and
inspecting them and found that they had worn down but not enought that
they needed replacing, so I put them back on. I found that I didn't
need to take the wheel off to determine this; I could see the wear
level from the side of the caliper through the wheel rims. I bought a
full set of brake pads from a Honda dealer for the front and back
wheels and will replace them when I hit 50K km.
I need info on how to replace or remove the spark plugs out of the
engine. Are there any schematics out there on the engine compartment?

Reply With Quote