On Mon, 29 Jan 2007 23:30:49 +0000 (UTC), Tegger <tegger@tegger.c0m>
wrote:


>
>No, you are not supposed to use sealant. You are however, supposed to make
>sure the sealing surfaces are clean, dry, and free from rust. New gaskets
>can't seal on a rough surface.
>
>The OP has not stated whether he had a problem with moisture in the
>taillamp assemblies, which is the first sign new gaskets are needed.
>
>My suggestion to the OP: Remove carpet and all trim panels from trunk area.
>Take car through a car wash, with an alert helper back there with a strong
>flashlight. Leaks should hopefully be evident.

Ok then. The surfaces (mine, not the OP), were clean and dry.