jim beam wrote:
> jim beam wrote:
> > fascion wrote:
> >> Timing is on 100% correct.
> >>
> > "timing" usually means the # of degrees the spark fires from top dead
> > center. "firing sequence" is the order in which the plugs fire. if the
> > plugs fire and fuel injects but it won't start, check the firing sequence.
>
> and how did you check the timing if the motor won't run?

Well, I suppose I didn't "check" the timing, I just set it. When the
distributor rotor was pointing to plug wire 1 ( bottom left ) the
number one cylinder ( 4 3 2 1 ) was at top dead center. The belt was
put on, and then tightened.