I removed shield from exhaust manifold and found hairline crack. I put
JB weld epoxy on it. It is sitting overnight now. Will post results.
Thank you.


TeGGeR® wrote:
> "wp51dos" <wp51dos@yahoo.com> wrote in news:1163550116.290594.172210
> @h48g2000cwc.googlegroups.com:
>
>
> >
> >
> > P0135 error code
> >
> > Thank you for reply.
> >
> > Car just passed california smog 2 months ago.
> >
> > I tried resetting the error code with all the things you said on
> > TeGGeR. Won't go out.
>
>
>
> How'd you try to reset it? By disconnecting the battery?
>
> When the light came back on again, was it the same code? There are
> literally 100 possible codes, so don't just assume it's the same one.
>
>
>
> >
> > Other ways to reset ?
>
>
>
> If the battery-unplug didn't work, and the light keeps coming back on
> with the same code, then the heater is truly bad and the sensor must be
> replaced.
>
> The only other way to reset is with the OBD-II scan tool.
>
>
> >
> > Car running fine. I will check gas milage.
>
>
>
> Won't tell you a thing. Will have no noticeable effect on mileage.
>
>
>
> >
> > Called Honda america. They say not covered period.
> >
> >
>
>
> It was covered as part of the new-car warranty, which is obviously long
> expired.
>
>
>
> --
> TeGGeR®
>
> The Unofficial Honda/Acura FAQ
> www.tegger.com/hondafaq/