"motsco_" <motsco_@interbaun.com> wrote in message
news:454F6571.3050100@interbaun.com...
> comcastss news groups wrote:
>> Is there a way to tell if they are press fit?
>>
>> Steve
>
>
> ----------------------------------------
>
> Look at your diagrams at www.slhondaparts.com
>
> You'll see if the two screws are there. If so, buy an impact driver and
> have at her.
>
> 'Curly'

For example, if yours is an EX 4 dr, it is probably this:
http://tinyurl.com/ykngz2
That is what you want (the screws are part #28)

My daughter's '93 Accord LX 4 cylinder is shown in http://tinyurl.com/yaz42d
Notice the disc is flat and is *behind* the hub. Changing it is a big hairy
deal - I've done each side of hers once. The disc is held by the 12-point
bolts (part # 23).

BTW, if my memory hasn't faded too much the screw heads are #3 Phillips; a
#2 Phillips head will just strip them out. A test fit before taking a whack
will save you minor grief.

Mike