Is there a way to tell if they are press fit?

Steve



"loewent via CarKB.com" <u10197@uwe> wrote in message
news:68e341c4c4c3d@uwe...
> use an impact screwdriver, the prescribed tool from honda. You hit the
end
> of it with a hammer, and it presses into the head of the screw while
turning
> it out. Works great for lots of different applications. Got mine for $10
at
> a surplus hardware store...
>
> Some accords rotors are pressed on though. This I would take to the shop.
I
> have seen the shop use a special tool that machines the rotors while they
are
> still on the car, so they must think removal is a pain in the ass too...
>
> t
>
> comcastss news groups wrote:
> >> no. it's two screws for the disk and two bolts for the caliper. can't
> >> get much easier.
> >
> >That's encouraging!
> >
> >Steve
>
> --
> Message posted via http://www.carkb.com
>