|| wrote:
> I have a 1993 Honda Civic DX two door. I need to replace the light
> switch located in the steering wheel column. I am doing this because
> the tail light won't turn off and I checked all the fuses and am left
> with this as the problem. This car has an airbag. I would like to
> know if I have to remove the steering wheel and if so do I need any
> special tools? Is this a difficult task and is my assessment correct?
> Is their a website with any information on how to do this?

http://www.autozone.com/servlet/UiBr...3d80141de3.jsp

Courtesy of Autozon
Repair Guide.

1992-95 Models

WARNING
All SRS wire harnesses are covered with a yellow insulation. Read the
SRS precautions found in this section and install the short connectors
as described.



1. Disconnect the negative battery cable and disable the SRS system.

2. Remove the upper and lower steering column covers.

3. Disconnect the 4-pin and 7-pin connectors from the switch.

4. Remove the switch retaining screws and slide the switch from its
mount.

To install:

5. Install the new switch in position and connect the electrical leads.

6. Install the upper and lower steering column covers.

7. Disconnect the short connectors and connect the negative and
positive battery cable.