Jim Yanik wrote:
> "YaleBoundCivic" <JoshuaS.Ray@gmail.com> wrote in
> news:1151705764.352310.222420@m73g2000cwd.googlegr oups.com:
>
>
>>I recently replaced the clutch and flywheel on my 92 1.5l Civic LX. It
>>was running just fine, but now when I turn the key all i hear is a
>>clicking noise. It sounds like the solenoid is working, but the
>>starter motor is not turning, any thoughts or corrections.
>>Thanks
>>Josh
>>
>>
>
>
> Probably a worn starter solenoid;IIRC,Civic starters have a replaceable
> solenoid....without having to replace the entire starter,but if that's not
> the case,as was with my 94 Integra,then check out this site;
> http://www.nationsautoelectric.com/Nippondenso.html

that's a great link for tegger's honda faq!

> You can buy replacement solenoid contacts and plunger and "rebuild" the
> solenoid yourself at considerable savings.It only cost me $30 USD PPD to do
> my starter.The hardest part was getting the lower starter bolt out,in order
> to remove the starter assembly for rework.It was frozen into the aluminum
> block...the bolt has long threads.Replacing the contacts and plunger was
> easy.
>
> The problem is that the contacts inside the solenoid get eroded by the
> starter current and eventually do not make contact anymore. You hear the
> clicking of the solenoid coil moving the plunger,but the contacts are not
> completing the circuit for the motor to get power.
>
> I'm not associated with the abovementioned company,just a satisfied
> customer.
>
>