This past weekend I replaced my two broken CV Joints.
I have a 1993 Accord w/ Manual Tranny and ABS.

The car was sitting for about a month while I was away on business. I
tackled the repair job (didn't drive the car until after joints were
replaced) and now have a problem with suspension. The car bounces up
and down about 4 or 5 times over small bumps, and over large bumps
there is a painful THUD! I don't know if my car is bottoming-out here
or not.

I heard that one should tighten the ball joints while the wheels are
on the ground and I intend to try that, but generally I don't know what
could cause this problem.
I don't know to suspect my shocks, bushings, or ball joints.
The bushing on my steering arm looked bad (what does bad look like
anyway?) but I don't have a problem with steering. If my bushings
are suspect, how can I tell if they look bad?

Thanks for any advice!!