Will do. Thx. TeGGeR

"TeGGeR®" <tegger@tegger.c0m> wrote in message
news:Xns9769541F5BD24tegger@207.14.113.17...
> "Moh" <moh@cbc.com> wrote in
> news5SHf.329$_D5.61968@news20.bellglobal.com:
>
> > 93 Civic 4 door driver side brake light is not working. I checked the
> > bulb and swapped it with the one on the passenger side, the bulb is
> > fine. This is a double filament bulb. One is the tail light (1) and
> > the other is for the brake.
> >
> > During day time , or when the headlight is OFF : Apply the brake =>
> > the tail light (filament) lit up, which is incorrect and also not
> > bright enough.
> >
> > Night time, or when the headlight is ON : Apply the brake => the tail
> > light (1) which was ON , goes OFF. Result => no tail or brake light.
> >
> > Wiring was not touch and looks fine. Where is the short and what can
> > be the cause ? Can someone point out the possible cause ?
> >
> >
> >
>
>
> Check ALL the sockets and bulbs for corrosion.
>
> --
> TeGGeR®
>
> The Unofficial Honda/Acura FAQ
> www.tegger.com/hondafaq/