tjhaight@charter.net wrote:

> Just did that one today, Curly is right,I borrowed a 3/4 drive ratchet
> and a 1 7/16 socket, note its a right hand thread, brace the ratchet
> with a block of wood or something like that and stand on the ratchet
> with both feet and jump as hard as you can. The block is to hold the
> ratchet from slippinf off the nut. Also i put the wheel back onto the
> car and let it down on the ground to get that narley nut off, that
> helped hold it steady. Now if i could just find out how to get the hub
> off the spindle, Can anyone help? Good luck on your project ,Terry
>

The knuckle arm is broke so I have no leverage...I will remove the
half-shaft assembly