Just did that one today, Curly is right,I borrowed a 3/4 drive ratchet
and a 1 7/16 socket, note its a right hand thread, brace the ratchet
with a block of wood or something like that and stand on the ratchet
with both feet and jump as hard as you can. The block is to hold the
ratchet from slippinf off the nut. Also i put the wheel back onto the
car and let it down on the ground to get that narley nut off, that
helped hold it steady. Now if i could just find out how to get the hub
off the spindle, Can anyone help? Good luck on your project ,Terry