dalmatiandigital wrote:
> We just performed a complete brake job on all 4 wheels on a 95 Honda
> Civic DX. New pads, new rotors and new drums all the way around.
> This is a job we did ourselves.
>
> The problem is that the car still vibrates when braking. It does not
> pull to the right or left, and you don't feel anything in the steering,
> but you feel a vibration in the brake pedal.
>
> Also, a few hundred miles ago both CV joints were replaced.
>
> Any ideas as to this vibration? Could there be any other problem other
> than warped rotors? If the rotors are warped would this more than
> likely be in the front only?
>
> Thanks for you help.
>
got to use the correct torque sequence. use two [or more] stage, 1324,
1324. preferably with the wheel off the ground for the first time
around. use a torque wrench.

there are other possible causes, but this is extremely common. report
back if this does not work.