View Single Post
  #2 (permalink)  
Old 28 Dec 2005, 05:08 pm
Elle
Guest
 
Posts: n/a
Default Re: Automatic Seat Belts Stopped Working

<tg@discovery.org> wrote
> Help! The altenator in my 1990 Honda Civic DX went out

and the last
> thing to die was the automatic seat belts on both driver

and passenger
> side. I replaced the altenator and everything is working

except the
> seat belts. The seat belt warning light stays on red and

a constant
> warning sound is on while I'm driving.


> I did some research and I also have the problem with my

car not
> starting if it is too hot. I usually just hose the hood

down and then
> it starts right up but I'm wondering if I have a relay

problem and if
> it might be connected to the problem with the seat belts.


I doubt they're connected.

Sure sounds like the notorious main relay problem. If it's
never been replaced/repaired on your car, I would be reading

http://www.tegger.com/hondafaq/start...html#mainrelay

and

http://techauto.tripod.com/mainrelay.htm

> I have
> 150,000 miles on the car and it normally runs very well.

I briefly
> talked to a mechanic at a Honda dealership about the

"lifetime"
> warranty on the seat belts...what a joke! He told me it

only applied
> if it was determined that the seat belts were "faulty"

(manufacturer
> defect).


I think he's wrong. Go to another dealer, or call Honda's
800 number. The automatic belts failing to operate was
covered under warranty on my 1991 Civic in 2001. The dealer
quickly figured out that they were, with no prodding or word
from me. It took the dealer a week or so to fix it (despite
repeated promises of 'it will be ready tomorrow,' and
despite their busting my radio antenna in the process), but
they got it done.

Seat belts are mentioned on my warranty card (which of
course came with the car when I bought it new many years
ago) as a lifetime item.

> He told me it could be electrical. Either way, he told me

it
> would cost $90 just to have a mechanic "LOOK" at the

vehicle.
>
> This jus seems to me like it must be a simple problem.

Can someone
> give me some guideance on what to do to troubleshoot this?



Reply With Quote