Louis,

the bolt you should be removing is #19 in this diagram.

http://www.hondaautomotiveparts.com/...3s5a01_b22.gif

Fish.





On Sun, 31 Jul 2005 18:28:18 GMT, THE LAD
<delgadola1remove1@yahoo.com> wrote:

>My first time changing pads on a honda. have the manual, which says
>to remove the bottom pin bolt and rotate the caliper up. The bolt is
>very difficult and even after loosening a couple of turns with a
>breaker bar is still very stiff. I am worried about damaging it. Are
>these bolts the type that are hard to turn for the whole thread
>pattern? the manual says they should only be tighted to 25 ft-lbs.
>It is taking a lot more than that to turn these bolts.
>
>Louis