motsco_ _ wrote:
> twfsa wrote:
>
>> I am going to adjust the valve clearance on both of my 01 CR-V's,
>> before I remove the Valve cover there is another item that has to be
>> removed I beleive its called the intake plentium.
>>
>> Before I remove(plentium) it by removeing the 4 fasteners, does anyone
>> know if there is a gasket where the plentium meets the intake
>> manifold. I am concerend that if there is a gasket, it will tear.
>>
>> I don't think that the owners manual mentions checking valve clearance
>> on the 01 models, as the in previous models, I have heard its a good
>> idea to check the clearance.
>>
>> I have a Haynes manual but it only covers 00 models and there is no
>> mention of the plentium when removeing the valve cover.
>>
>> thanks
>>
>> Tom
>
>
> -----------------------------
>
> Since that chamber is meant to be removed on occasion, the gaskets are
> surely some kind of synthetic rubber or nylon, like inside the air
> filter box. They will be reusable. Just slip it off and do your thing....

P.S. When you do the adjustments, make sure to set them to the loose
side of the spec, since they tend to tighten on the first generation
CR-v. Wouldn't hurt to write a note in your owner's manual that says:
Every 30,000 miles / 50,000 Km. Same interval for rear differential
fluid, formerly called CVT Fluid, now called Dual Pump Fluid.

http://www.hondasuv.com/stg/viewtopic.php?t=9628&

> 'Curly'
>