How often does the rotor require replaceing?

Tom

"motsco_ _" <"motsco_ _"@interbaun.com> wrote in message
news:4258104F.50002@interbaun.com...
> Bud Campbell via CarKB.com wrote:
>> I am trying to change the dist. rotor on a 97 CR-V, but can't get a
>> screwdriver or ratchet behind it to loosen the screw. Any ideas or
>> help??
>> thanks
>
>
> -----------------------
>
> The screw head has to be facing the firewall for you to get at it . . Turn
> the engine over using the starter and / or power steering pulley nut to
> get it there. Be sure to use a large phillips screwdriver, or grind a few
> thousandths off the tip of whatever you have if it doesn't fit the screw
> PERFECTLY. A drywaller's large tip might fit well. You'll probably need
> lots of torque to get it out, so don't start by wrecking the screw with an
> incorrect tip.
>
> http://www.hondasuv.com/stg/viewtopic.php?t=8173
>
> You can also slip the distributor out in about five minutes, but make sure
> to mark the exact position of the timing adjustment, and replace the
> O-ring when you reassemble.
>
> 'Curly'
>