"motsco_ _" <"motsco_ _"@interbaun.com> wrote in
news:42588301.2070004@interbaun.com:

> disallow wrote:
>> i use an impact screwdriver to get this screw
>> undone. You know, you whack the end of this
>> screwdriver with a hammer, and it turns and
>> pushes down simultaneously. This tool works
>> great for any stripped or stubborn fasteners,
>> as long as you have room to swing a hammer.
>>
>> http://www.brandsonsale.com/impact-screwdriver.html
>>
> -------------------
>
> Impact driver sounds like a good (actually great)idea, but distributor
> MUST be removed and the top end rested on an anvil or something (destroy
> the old rotor), since you'd be hammering against a fairly soft steel
> shaft that's inside a cast aluminum distributor. Something could surely
> get bent or cracked.
>


I am assuming this is all concerning a PHILLIPS screw?


--
TeGGeR®

The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/