disallow wrote:
> i use an impact screwdriver to get this screw
> undone. You know, you whack the end of this
> screwdriver with a hammer, and it turns and
> pushes down simultaneously. This tool works
> great for any stripped or stubborn fasteners,
> as long as you have room to swing a hammer.
>
> http://www.brandsonsale.com/impact-screwdriver.html
>
-------------------

Impact driver sounds like a good (actually great)idea, but distributor
MUST be removed and the top end rested on an anvil or something (destroy
the old rotor), since you'd be hammering against a fairly soft steel
shaft that's inside a cast aluminum distributor. Something could surely
get bent or cracked.

'Curly'