OK, I think I worded the post wrong. Here it goes again....

I replaced my left side 2-P connector with a ride side 2-P connector
because the left side one was corroded and I couldn't twist the bulb loose
to replace. I went to a junk yard and only found right side ones. So now my
car has 2 right side 2-P connectors. I did change the bulb, but supposedly
it was the correct one. I read on one post that if the bulb is not the
correct one, even though everything works fine the sensors will detect a
difference. Is that true?

I'll definitely check the bulbs tomorrow. What exactly do I have to look
for? What are the proper specs on the bulbs?

"DaveT" <bgates@sbcglobal.net> wrote in message
news:l7QGd.18829$iC4.6380@newssvr30.news.prodigy.c om...
> Hey guys,
>
> I recently changed the back left bulb wire on my 92 Accord. I couldn't
> find a left-side one, so I used a right-side one on the left side. All the
> rear lights work, but inside the cabin on the dash the little red brake
> lamp light is on. I know it's no big deal as long as everything works, but
> IT ANNOYING AS HELL!!! How could I fix this?
>
> Dave
>