twfsa wrote:
> When looking in thru the left wheel houseing at the crankshaft pulley in
> what direction does the nut have to turn to remove it.
>
> I am going to adjust the valves with the spark plugs out, and use the pulley
> to rotate the engine, but do not want to loosen the the pulley.
>
> Somewhere it said to rotate the pulley counter clockwise, when doing the
> adjustment, and if thats so the nut on the pulley may loosen.If it were to
> loosen I have a torque wrench, but whats going to hold the pulley, while its
> tightened?
>
> I looked at useing the alternator pulley nut,but its impossible to reach
> from above, and see what position the rocker arms in .
>
> Thanks
>
> Tom
> ---------------------

Tom,

Read the responses you got to your previous post !!

You don't need to touch the crank pulley nut, just the POWER STEERING
nut. If you want to fart around removing the front left wheel and
jacking up the CRV, do whatever you want . . . That nut won't come loose.

'Curly'