"flycivic" <UseLinkToEmail@AutoForumz.com> wrote in message news:41887d69$1_5@alt.athenanews.com...

> > The other day I woke up and my car had a stumble really bad.
> > drove around then let it chill and now it wont crank up at
> > all. first I replaced the fuel filter and the plugs. im getting
> > gas. then I replaced the distrib. cap and rotor. still no
> > start. then I went deeper and tested the coil-tested fine-
> > then tested and replaced the igniter(ignition control module).
> > still no start. I checked with my electric tester and im
> > getting power to my coil from the black/yellow wire but it
> > seems like the power wont go to the cap or rotor. im as
> > confused as a baby in a tity bar. any help here would be
> > greatly appreciated. Also in my Haynes
> > manual it said with the wires disconnected from the coil I
> > should be getting power to the blue/white wire where it
> > attaches to the igniter- I didn't get power there on my old or
> > new igniter

> also....just checked to see if i get a spark from the coil to a
> grounded wire and no spark, yet electric tester still reveals
> power??????

Supply power to the coil ¼ of second. There should be spark.