flycivic wrote:
> the other day i woke up and my car had a stumble really bad. drove
> around then let it chill and now it wont crank up at all. first i
> replaced the fuel filter and the plugs. im gettin gas. then i replaced
> the distrib. cap and rotor. still no start. then i went deeper and
> tested the coil-tested fine- then tested and replaced the
> igniter(ignition control module). still no start. i checked with my
> electric tester and im gettin power to my coil from the black/yellow
> wire but it seems like the power wont go to the cap or rotor. im as
> confused as a baby in a tity bar. any help here would be greatly
> appreciated also in my haynes manual it said
> with the wires disconected from the coil i should be gettin power to
> the blue/white wire where it attaches to the igniter- i didnt get
> power there on my old or new igniter
>


+++++++++++++++++++++++

Did you check to see if the rotor turns when the engine is cranked?
(timing belt failure)

Fuel filter manifests at HIGH speed.