the other day i woke up and my car had a stumble really bad. drove
around then let it chill and now it wont crank up at all. first i
replaced the fuel filter and the plugs. im gettin gas. then i replaced
the distrib. cap and rotor. still no start. then i went deeper and
tested the coil-tested fine- then tested and replaced the
igniter(ignition control module). still no start. i checked with my
electric tester and im gettin power to my coil from the black/yellow
wire but it seems like the power wont go to the cap or rotor. im as
confused as a baby in a tity bar. any help here would be greatly
appreciated also in my haynes manual it said
with the wires disconected from the coil i should be gettin power to
the blue/white wire where it attaches to the igniter- i didnt get
power there on my old or new igniter

--
http://www.AutoForumz.com/ This article was posted by author's request
Articles individually checked for conformance to usenet standards
Topic URL: http://www.AutoForumz.com/Honda-95-c...pict77941.html
Visit Topic URL to contact author (reg. req'd). Report abuse: http://www.AutoForumz.com/eform.php?p=347881